The car's wheels are normally mounted on the hub, therefore the hub bore should be just of the same size to well accommodate it. Most wheels feature a basic hub bore size of 60mm-73mm. Although, some aftermarket wheels for the Hyundai Kona might have a wider bore sizing. Because of that, chauffeurs should be rather aware once tagging all-new wheels. With the condition that you're doubtful about the bore size, just refer to the Hyundai Kona vendor's handbook or hub bore size charts on our firm`s website. Just spot the wished model and you would take a look at the thirsted particulars. Along with our firm`s guidance, the buying process might be much simpler!
Hyundai Kona hub bore size chart
Hyundai Kona Hub Bore
2023 2022 2021 2020 2019 2018Hub Bore | 67.1 mm Use Hub Centric Rings |
Wheel Center Bore | |
Kona Bolt Pattern (Lug Pattern) | PCD 5x114.3 See Adapters |
Thread size (Lug Nut Size) | M12 x 1.5 Lug Nuts |
Hub Bore Guide
-
Wheel Bearing Noise - How Does It Sound?
When you hear a noise that sounds like metal grinding on metal, it's likely that your car's wheel bearings need to be replaced. Wheel bearings allow the wheels to rotate smoothly and without...
Discussion